COMBICOLOR® THINNER HAMMERTONE
- Easy to pour
- Reclosable packaging
- Special for CombiColor Original and Hammertone, also for cleaning and degreasing
COMBICOLOR® THINNER STANDARD
- Easy to pour
- Reclosable packaging
- Special for CombiColor Original and Hammertone, also for cleaning and degreasing
COMBIPRIMER® ADHESION PRIMER
- Easy to apply
- Transparent blue finish
- Recoatable after just 30 minutes
- Very high coverage: 50 m²/l
COMBIPRIMER® ADHESION PRIMER AEROSOL
- Easy to apply
- Transparent blue finish
- Recoatable after just 30 minutes
- Very high coverage: 4,4 m²/can
COMBIPRIMER® ANTI-RUST PRIMER
- Recoatable after 2 hours
- For new / slightly rusted surfaces
- Grey for light coloured topcoats
- Red for dark coloured topcoats
COMBIPRIMER® ANTI-RUST PRIMER AEROSOL
- Recoatable within 1 hour or after 48 hours
- For new / slightly rusted surfaces
- Grey for light coloured topcoats
- Red for dark coloured topcoats
COMFORT SPRAY GRIP
- Ergonomic design
- Large soft touch trigger
- Durable construction
- For all HARD HAT® aerosols
DAC HYDRO ALU
- Prevents strong warming up of the surface
- Lasting 400% elastic layer without seams or joints
- Decorative aluminium finish resist UV-radition, temperature changes, water and pollution
- Waterproof guarantee when used as topcoat on Dacfill®
- Water-based formulation, low odour
DAC HYDRO D
- Higher layer thickness gives extra protection
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Rain-proof after just 1 hour
- Smooth decorative finish with lasting colour and gloss retention
- Water-based formulation, low odour
DAC HYDRO PLUS
- Quick, easy to apply and affordable
- No need for a special primer on concrete
- Cost effective coverage: 10m²/L
- Lasting gloss and colour
- Rain-proof after just 2 hours
- Water-based formulation, low odour
DACFILL PU BASECOAT
- Easy to apply and detail
- Wet-on-wet application
- Compatible with most existing roof membranes
- Permantent elastomeric and seamless
- Excellent resistance to ponded water
- Fibre reinforced for maximum film strength
DACFILL PU TOPCOAT
- Easy to apply and detail
- Compatible with most existing roof membranes
- Permantent elastomeric and seamless
- Excellent resistance to ponded water
- Fibre reinforced for maximum film strength
- Available in slate and dove grey
DACFILL®
- For many sloped (min. 5%) roof types: bitumen, cementitous, asphalt, plastics
- 100% watertight high build coating
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Safe and easy to use
- Easy to apply with a brush, roller or airless spray
DACFILL® FLEECE
- Improves mechanical strength in Dacfill® or Dacfill® HZ systems
- Improved waterproofing
DACFILL® FRIGO
- Ideal for cold stores and storage rooms
- Resistance against sudden variations in temperature
- Does not contain solvents or bituminous products
- Flexible rubberlinke coating is impact resistant
- Self-extinguishing (DIN 4102)
DACFILL® HZ
- Quick drying 100% watertight coating
- Resistant to UV radiation, acid rain, heat, frost and pollution
- White colour reflects most sunlight
- Non-flammable and self-extinguishing
- Seamless elastic finish lasts for years
- Easy to apply with a brush, roller or airless spray
DECORATIVE COLOUR CHIPS
- Durable
- Mix and match chip blends to customize your color scheme
- Helps to hide dirt and surface imperfections
EPOXYSHIELD® CLEANER/DEGREASER
- Removes grease, oil and other contaminations
- Virtually odour free
- Non-flammable
- 6-8 m²/l coverage
EPOXYSHIELD® CONCRETE REPAIR MORTAR
- Traffic allowed after 24 hours
- Recoatable after 48 hours
- 10 kg (1-component) – 0.4 m²
- Sandable to a smooth finish
EPOXYSHIELD® GARAGE FLOOR COATING
- 2-part water based epoxy
- Complete kit including instructions
- Resists gasoline, antifreeze, motor oil, salt and hot tire pick-up
EPOXYSHIELD® MAXX + ADDITIVES
- Water based
- For medium to heavy traffic
- Easy to apply, no primer required
- Long-lasting gloss finish (Non-skid or decorative finish optional)
- Highly resistant against solvents, chemicals and car tyres
EPOXYSHIELD® SEALER
- Single pack, easy to apply
- Non yellowing clear finish (gloss)
- Touch dry after just 1 hour
- Ideal primer for EpoxyShield® ULTRA coatings
EPOXYSHIELD® ULTRA
- For light to medium traffic
- Easy to apply
- Touch dry after just 2 hours
- Satin matt finish
- Good resistance to car tyres and various chemicals
FILLCOAT® FIBRES WATERPROOFING
- Repairs holes and cracks up to 2mm instantly
- Excellent adhesion to various substrates
- Can be applied in all weather conditions
- Direct repair of gutters, roofs, chimney stacks, pipes and more
- Bitumen-free formula
FILLCOAT® WATERPROOFING
- Thick elastic waterproof coating
- Excellent adhesion to various substrates
- Can be applied in all weather conditions
- Renovation of weathered roofs
- Can be applied by brush, roller or airless
- Bitumen-free formula
FK111 CLEANER/DEGREASER
- High-viscosity formulation is ideal for use on walls, does not run off the wall
- Removes grease, oil, proteins , dirt and many other contaminants
- Ready-use mixture, can be diluted for light pollution
- Neutralizes acids and acidic salts
- Non-flammable, virtually odour-free
GRAFFITISHIELD™ CLEANER
- Effective in minutes
- Mild aroma
- Universally effective
- Suitable for use in closed spaces
- Removes most paint types
GRAFFITISHIELD™ HYDRO
- Ideal for natural stone types
- Almost invisible result
- No film building
- Excellent UV-resistance
- Transparent protection
- Waterproof (Hydrophobic)
GRAFFITISHIELD™ POLYCOAT
- Hard, smooth surface makes it easy to clean any graffiti on it
- Solvent-free, low odour
- Single pack, non-yellowing polyurethane
- Transparent protection
- Also useful as a colourless varnish for floors
